# libk
libk is intended as a modernized replacement *(not* reimplementation) for libc.
# manifesto
normally, all C binaries (and binaries from other languages, depending on the platform) use a combination of libraries to get things done: POSIX libraries (interfaces common to UNIX-like operating systems) and libc, the C standard library. unlike POSIX, libc is part of the C language -- it's a standardized interface to various critical parts of the operating system, things like IO, system clock access, random number generation, and more.
it's also a piece of shit.
libc is ancient, and it shows. it contains decades worth of cruft, masses of different interfaces with completely different design, horrible hacks to get around the fundamental shifts in basic computer architecture that have occurred over the past half-century, and vendor-specific extensions that make porting code a nightmare. using it is painful, tedious, error-prone, and unsafe. for various reasons, there are many different implementations of libc, but all of them have that same broken, bloated interface in common. as far as i can tell, there are been no serious attempts to create an actual *alternative* to libc - a new system interface that takes into account the decades of painful lessons we programmers have learned since the heydays of UNIX.
hence, libk.
libk aims to offer a better, safer, and most importantly, less unpleasant foundation for modern code in C or any other language. it also aims to be much smaller, simpler, and faster than glibc to build so that there's no arduous bootstrapping process for new architectures.
currently, the only dependency on libc in any form is `arch/typesize.c`, a small binary tool which uses libc IO routines to print type information it calculates; however, this could also be augmented to use POISX IO routines, or even potentially libk IO routines to remove any external dependency at all -- the work would be nontrivial, but fully feasible. further, the file it creates can also _in extremis_ be created by hand. the final compiled libc binaries and headers do not depend on or reference libc in any way; typesize is only a makedepend.
## goals
libk's goals are far-reaching, and suggestions are welcome. note however that libk is *not* intended to be a kitchen-sink library like libiberty. it's meant to do one thing, and to it well: to provide an easy- and pleasant-to-use foundation for modern open source projects. below is a list of some of the project's major goals.
1. **IO.** libc's basic input/output mechanisms are dreadful, built at entirely the wrong level of abstraction. libk is intended to make many more primitives available to the user, and offer a sliding scale of abstraction so libk is suitable for a wide range of needs.
2. **file manipulation.** libc's file manipulation primitives are a relic of a bygone age and in dire need of upgrading.
3. **terminal manipulation.** libc has no provision for simple output formatting, a task that requires a combination of ANSI codes and in some cases pty manipulation with POSIX APIs, both of which are somewhat dark wizardry. this situation forces many innocent coders to drag in the entire unholy bulk of the aptly named library `ncurses`, much of whose code has been utterly obsolete for the last twenty years and whose API is one of the most singularly hateful ones in existence. libk therefore should offer a simple, straightforward way to do gracefully-degrading terminal sorcery.
4. **memory management.** the single memory management function `malloc()` provided by libc is absolutely pitiful. this is 2019. modern applications have much more exotic allocation needs, and a standard library should offer a range of allocators and management techniques, as well as abstract pointer objects so that pointers to objects of different allocation types (including static or stack allocation!) can be mixed freely and safely.
5. **intrinsic reentrancy.** because *jesus christ,* libc.
6. **interprocess communication.** libc offers no useful IPC abstractions over the paltry array of tools POSIX &co. give us to work with. we can do better.
7. **tooling.** libk is intended as more than just a library. it's also intended to work with some basic tooling to automate tasks that current binary tooling is inadequate for -- for instance, embedding binary data into a program binary. (see module [kgraft](kgraft))
8. **modularity.** libk is not part of the C specification and it isn't always going to be practical for developers to expect the entire library to be present on the end-user's computer. so libk is designed to be usable in many different ways -- as a traditional library, as a static library, in full form or with only components needed by the developer, to be distributed either on its own or as part of a binary.
9. **compatibility.** code that links against libk should be able to compile and run on any operating system. in the ideal case (Linux or FreeBSD) it will be able to do so without touching any other system libraries; for less ideal environments like Windows, libk will when necessary abstract over system libraries or libc itself.
10. **sane error-handling.** every time you type `errno` god murders a puppy.
11. **ease of distribution.** libk should enable to user to create completely static binaries, free of any local dependency and trivial to distribute.
# dependencies
libk is designed to be as portable and depedency-free as possible. ideally, it will be possible to compile code against libk using nothing but libk itself.
compiling libk is also designed to be as easy as possible. it has only two external dependencies, the macro processor [m4], needed for compile-time header generation, and optionally the [commonmark] compiler `cmark`, which is only needed if you wish to typeset the documentation in manpage, html, or pdf format. this process also requires `groff`, but `groff` is a standard part of most UNIX systems.
[m4]: http://www.gnu.org/software/m4
[commonmark]: http://www.commonmark.org/
a different macro processor, gpp, was used in early versions of libk, however, it was so obscure and took so much overly fragile infrastructure to make it work that the cleaner syntax just wasn't worth it; i've since deleted the gpp infra and ported the macro files to m4.
# naming conventions
one of the most frustrating things about libc is its complete and total *lack* of a naming convention. in C, every function and global is injected into a single global namespace, including macros. this means that every libc header you include scatters words all over that namespace, potentially clobbering your function with a macro!
libk is designed to fix this (in hindsight) glaring error.
however, a common problem with libraries is the proliferation of inordinately long and hard-to-type function names such as `SuperWidget_Widget_Label_Font_Size_Set()`. this may be tolerable in IDEs with robust auto-complete or when referencing a highly-specific, sparsely-used library; it is however completely intolerable in the case of a core library with heavily used functionality.
therefore, libk uses two slightly different naming conventions: the **short** convention, for core functions the user will call frequently, and the **full** convention, for less-commonly used functions. the inconvenience of remembering which is which will hopefully be outweighed by the keystrokes (and bytes) saved.
in the **full** convention, an identifier's name is prefixed with its module name followed by an underscore. thus, `kgraft/list.c` is invoked as `kgraft_list()`.
in the **short** convention, identifiers are prefixed by the letter `k` followed by the module's "glyph" -- a one- or two-letter sequence that represents the module, usually the first one or two characters. therefore, `kfile/open.c` is invoked as `kfopen`.
which naming convention a module uses should be specified at the top of its documentation. if it uses the short convention, its glyph should be specified as well
in both naming conventions, the following rules apply:
1. the possible values of enumeration types are always preceded by the name of the enumeration type and an underscore. for instance, the enum `ksalloc` has a value named `ksalloc_static`. **exception:** an enum named `<S>_kind`, where `<S>` is a struct type, may simply use the prefix `<S>_`.
2. macros begin with the uppercase letter `K` -- e.g. `Kmacro`. macros that can be defined by the user to alter the behavior of the api should begin with `KF` if they are on/off flags, or `KV` otherwise.
3. capital letters are only used in macro prefixes.
4. low-level function names are prefixed with the API they call into. for example, the function that performs the POSIX syscall `write` is named `kio_posix_fd_write`. a wrapper around the Windows function `CreateProcess()` might be called `kproc_win_createprocess`.
## atoms
libk uses the concept of "atoms" (small, regular strings of text) to standardize common references, such as operating systems or processor architectures.
**operating systems**
these atoms will be used to reference operating systems.
* Linux: `lin`
* Haiku: `hai`
* Android: `and`
* FreeBSD: `fbsd`
* NetBSD: `nbsd`
* OpenBSD: `obsd`
* Darwin/Mac OS X/iOS: `dar`
* MS-DOS: `dos`
* FreeDOS: `fdos`
* Windows: `win`
* Windows MinGW: `mgw`
**file extensions**
* C function implementations: `*.c`
* C module headers: `*.h`
* ancillary C headers: `*.inc.h`
* assembly code: `*.s`
**arches**
these atoms will be used to reference particular system architectures. these will mostly be used in the filenames of assembly code.
* Intel/AMD x86: `x86`
* ARM: `arm` (aarch64 is specified by `os=arm bits=64`)
* MIPS: `mips`
* Itanium: `ia64` (no bits)
* PowerPC: `ppc`
# localization
libk does not interface, respect, or wrap system locale APIs in any way. localization, for the most part, is the responsibility of the developer. this is necessary in order to prevent hidden state from accreting, which lets us make certain invariant guarantees about library behavior that can prevent highly confusing bugs or potentially even have security implications.
this is not to say that libk supports only one language, one calendar, and one culture. mechanisms will exist to produce localized output; however, they require the developer to explicitly pass localization flags and state. that is to say, they are stateless and opt-in only. the user changing an environment variable will never cause, e.g., decimal points to turn into commas unless the coder explicitly specified that behavior.
libk uses UTF8 exclusively. it has no concept of codepages or non-unicode charsets.
# macros
libk will not in any circumstance use macros to encode magic numbers, instead using typedef'd enums. all libk macros begin with the uppercase letter `K` -- e.g. `Kmacro`. macros that can be defined by the user to alter the behavior of the api should begin with `KF` if they are on/off flags, or `KV` otherwise. **macros should only be defined by the libk headers if the flag `KFclean` is *not* defined at the time of inclusion.**
include guards take the form of the bare module name prefixed by `KI`. so to test if `k/term.h` has been included, you could write `#ifdef KIterm`.
# languages
libk uses only five widely-used and standardized computer languages: C (\*.c, \*.h), yasm (\*.s), awk (\*.awk), commonmark (\*.md), and bash (\*.sh). further languages may not be introduced into the project without explicit advance approval of the maintainer herself.
other assemblers will probably be necessary for the more exotic targets, however.
# repository structure
libk uses a strict directory structure for code, and deviations from this structure will not be tolerated without extremely good reason.
total segregation is maintained between source code, temporary files, and output objects. source is found in module directories (`k*/`). the destination for temporary files and output objects are retargetable via the environment variables `gen= out=`, but default to `gen/` and `out/`, which are excluded from repo with fossil's `ignore-glob` settingapproval of the maintainer herself.
all libk code is dispersed into modules: `kcore` for internals, `kio` for I/O, `kgraft` for binary packing, etc. each module has a folder in the root directory. (libk does not have submodules.) inside each module's directory should be a header with the same name as the module (see **naming conventions** above).
each function should be kept in a separate file within its module's directory. the file's name should consist of the dot-separated fields [name, class, "c"] for C sources, or [name, class, arch, OS, bits, format, "s"] for assembly sources, where "name" is the name of the function without the module prefix and "class" is `rt` if the file is part of the libk runtime, or `fn` otherwise. this distinction is necessary because while the static library `libk.a` can include runtime objects, the shared library `libk.so` cannot. examples:
* a C file in the module `kstr` named `kscomp` would be named `kstr/comp.fn.c`
* a runtime assembly file called `boot` in the module `kcore` for x86-64 linux would be named `kcore/boot.rt.x86.lin.64.s`
* the 32-bit x86 haiku version of a function called `kiowrite` defined in assembly would be named `kio/write.fn.x86.hai.32.s`.
each module should have a header named the same thing as the module except without the `k` prefix. (e.g. the header for `kio` is `kio/io.h`) located in its folder. this is the header that the end-user will be importing, and should handle any user-defined flags to present the API the user has selected.
each module should contain a markdown file. this file's name should be the name of the parent directory suffixed with `.md`; for instance, `kterm` should contain the file `kterm/kterm.md`. this file should document the module as thoroughly as possible
each module may contain any number of files of the name `*.exe.c`. this files will be treated as *tools* by the build system and compiled as executables, rather than libraries. they should be compiled to `out/$module.$tool`
the repository root and each module may also contain the directory `misc`. this directory may be used to store miscellaneous data such as ABI references, developer discussions, and roadmaps. if the `misc` directory is deleted, this must not affect the library or build system's function in any way - that is, nothing outside a `misc` folder may reference a `misc` folder or anything inside it, including documentation. the `misc` directory should be removed when its contents are no longer needed. in most cases, the repository wiki and forum should be used instead of the `misc` folder.
the folder `arch` in the root of the repository contains syscall tables and ABI implementations for various architectures.
# build system
libk uses a very simple build system. the entire project is built with the `build.sh` script in the project root. `build.sh` need not be modified so long as all you're adding is functions, runtime stubs, headers, documentation files, or macro files in line with the standard naming convention. it will need to be modified to add or remove modules. it does not track dependencies, recompiling the entire project in one fell swoop. while in theory this could be slow and inefficient, in practice, it's not meaningfully slower on the average run than the old make-based system was.
the shell-based build system was chosen for a number of reason. firstly, libk originally used a GNU make-based build system, but this was unwieldy and unreliably - make simply does not have the necessary capabilities to build a project of this nature. the original build system relied heavily on recursion, which is impossible to use while preserving idempotency. multithreaded building was likewise impossible.
relying on make also had a number of subtler downsides. GNU make's capacities vary significantly across versions, and not all users will necessarily have access to the correct version in their repos. even a version as recent as make 4.1 couldn't build a project that build without issue in 4.2. given that libk is explicitly intended to be widely portable, this variance was alarming. make is also very indirect - it's a pain in the ass to tell it what to do sometimes, and it's well nigh on impossible to decipher the intricate way in which a sufficiently complex set of makefiles interlocks. this is both user- and developer-hostile. by contrast, a simple, linear build script with clearly delineated functions makes the build process much easier to understand, and therefore to tweak should a user need to modify some aspect of the process to compile `libk` on her system.
finally, make simply has a smaller install base than `bash`. with the `build.sh` build system, more people can successfully build libk with less effort.
any time you change build script, always specify precisely what changed in your commit log and what affects this might have on the surrounding code. be sure to comment any new code as thoroughly as you can. the goal is that anyone who is familiar with bash should be able to learn the build process simply by reading `build.sh`.
## build process
to build libk, you must invoke `build.sh` with the proper parameters. at minimum you must set the following environment variables:
* `os={atom}` - an atom representing the operating system you are building libk for
* `arch={atom}` - an atom representing the processor architecture you are building libk for
* `bits={atom}` - if your processor has multiple variants with different word lengths (such as x86-32 vs. x86-64), specify the word length in this variable; otherwise, leave it unset.
further optional variables may be set to control the build process and determine what targets it produces.
* `library=static {static|shared|both}` - this variable controls whether the build process will produce `libk.a`, `libk.so`, or both.
* `out=out {path}` - an alternate path to store build artifacts in
* `gen=gen {path}` - an alternate path to store generated source in
* `cc=<autodetect> {executable}` - the compiler to compile C sources with
* `m4=<autodetect> {executable}` - the m4 binary to compile the macro sources with
* `asm=<autodetect> {executable}` - the assembler to assemble the assembly listings with. it must take Intel-syntax input and handle nasm-style macros. only `yasm` and `nasm` are likely to be viable.
* `doc=yes {yes|no}` - whether to typeset the documentation (very slow with all three formats set to "yes")
* `doc_html=yes {yes|no}` - enable or disable html output of the documentation
* `doc_pdf=yes {yes|no}` - enable or disable pdf output of the documentation
* `doc_man=yes {yes|no}` - enable or disable manpage output of the documentation
two other shell scripts complete the build system:
* `install.sh` - installs compiled libraries, objects, documentation, and headers into the appropriate directories.
# design principles
there are four overriding principles that guide the design of libk.
1. it should be easy to write code that uses it.
2. it should be easy to read code that uses it.
3. the simple, obvious way of using libk should produce the most optimal code.
4. code that uses libk should be idiomatic C.
for these reasons, the codebase follows a number of strict rules.
### booleans are banned
there are a number of reasons for this.
the first is simply that the boolean type in C is a bit messy and libk headers are intended to import as few extra files as possible.
the second is that boolean-using code can be hard to read. consider a struct declaration of the form `rule r = { 10, buf, true, false, true }`: the meaning of this declaration is opaque unless you've memorized the structure's definition.
instead, libk uses enums liberally. so the above might be rewritten as e.g.:
rule r = { 10, buf,
rule_kind_undialectical,
rule_action_expropriate,
rule_target_bourgeoisie
};
this makes code much more legible and has the added benefit of making the definitions easier to expand at a later date if new functionality is needed without breaking the API or ABI.
# authors
so far, this is a one-woman show. contributions are welcome however.
* lexi hale <lexi@hale.su>
# caveats
the main coder, lexi hale, is first and foremost a writer, not a coder. this is a side-project of hers and will remain so unless it picks up a significant amount of attention.
while MRs adding support for Windows, OS X, and other operating systems will be gratefully accepted, the maintainer is a Linux and FreeBSD developer, will not be writing such support infrastructure herself, and has limited ability even to vet code for those platforms.
# license
libk is released under the terms of the [GNU AGPLv3](LICENSE). contributors do not relinquish ownership of the code they contribute, but agree to release it under the same terms as the overall project license.
the AGPL may seem like an inappropriately restrictive license for a project with such grandiose ambitions. it is an ideological choice. i selected it because libk is intended very specifically as a contribution to the *free software* community, a community that i hope will continue to grow at the expense of closed-source ecosystems. i have no interest in enabling people or corporations to profit from keeping secrets, especially not with my own free labor (or anyone else's, for that matter).
if you disagree with this philosophy, you are welcome to continue using libc.
# what does the k stand for?
nothing. it was chosen in reference to libc - the letter C was part of the original roman alphabet, while K was added later by analogy to the Greek kappa ‹κ›. in my native language, the older letter ‹c› can make a number of different sounds based on context, including [k] and [s], while ‹k› is fairly consistently used for the sound [k]. and for orthographical reasons, [k] is often represented by the digraph ‹ck› - that is, a C followed by a K. hopefully the analogies are obvious.
this project has nothing to do with KDE.